NetBSD 3.1_STABLE (URSULA.MP) #0: Fri Aug 31 19:52:50 PDT 2007 allen@job.slackula.com:/usr/obj/sys/arch/macppc/compile/URSULA.MP total memory = 512 MB avail memory = 488 MB mainbus0 (root) cpu0 at mainbus0: 7400 (Revision 2.9), ID 0 (primary) cpu0: HID0 8094c0a4 cpu0: 450.00 MHz, no-parity 1MB WB L2 cache (PB SRAM) at 2:1 ratio cpu1 at mainbus0cpu1: 450.00 MHz : 7400 (Revision 2.9), ID 1 cpu1: HID0 8094c0a4 cpu1: 450.00 MHz, no-parity 1MB WB L2 cache (PB SRAM) at 2:1 ratio uninorth0 at mainbus0 pci0 at uninorth0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 11 function 0 pchb0: Apple Computer UniNorth AGP Interface (rev. 0x00) ofb0 at pci0 dev 16 function 0: ATI Technologies Radeon 7000/VE ofb0: 640 x 480, 8bpp wsdisplay0 at ofb0 kbdmux 1: console (std, vt100 emulation) wsmux1: connecting to wsdisplay0 uninorth1 at mainbus0 pci1 at uninorth1 bus 0 pci1: i/o space, memory space enabled pchb1 at pci1 dev 11 function 0 pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) ppb0 at pci1 dev 13 function 0: Digital Equipment DC21154 PCI-PCI Bridge (rev. 0x05) pci2 at ppb0 bus 1 pci2: i/o space, memory space enabled ahc0 at pci2 dev 2 function 0: Adaptec 29160N Ultra160 SCSI adapter ahc0: interrupting at irq 52 ahc0: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsibus0 at ahc0: 16 targets, 8 luns per target ex0 at pci2 dev 3 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x24) ex0: interrupting at irq 53 ex0: MAC address 00:10:4b:75:cd:e2 OUI 0x000000 model 0x0000 rev 0 at ex0 phy 24 not configured obio0 at pci2 dev 7 function 0: addr 0x80000000 enabling KeyLargo internal modem zsc0 at obio0 offset 0x13000: irq 22,50 zstty0 at zsc0 channel 0 zstty1 at zsc0 channel 1 awacs0 at obio0 offset 0x14000: irq 24,9,10 audio0 at awacs0: full duplex adb0 at obio0 offset 0x16000 irq 47: pm_adb_op: timeout. command = 0x0 0 targets aed0 at adb0 addr 0: ADB Event device apm0 at adb0: battery flags 0x1, 0% charged wdc0 at obio0 offset 0x1f000 irq 19: DMA transfer atabus0 at wdc0 channel 0 wdc1 at obio0 offset 0x20000 irq 20: DMA transfer atabus1 at wdc1 channel 0 wdc2 at obio0 offset 0x21000 irq 21: DMA transfer atabus2 at wdc2 channel 0 ohci0 at pci2 dev 8 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00) ohci0: interrupting at irq 27 ohci0: OHCI version 1.0 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1 at pci2 dev 9 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00) ohci1: interrupting at irq 28 ohci1: OHCI version 1.0 usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: Apple Computer OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered fwohci0 at pci2 dev 10 function 0: Texas Instruments TSB12LV26 IEEE 1394 Host Controller (rev. 0x00) fwohci0: interrupting at irq 63 fwohci0: OHCI 1.0, 00:30:65:ff:fe:c4:a1:d2, 400Mb/s, 2048 max_rec, 4 ir_ctx, 8 it_ctx uninorth2 at mainbus0 pci3 at uninorth2 bus 0 pci3: i/o space, memory space enabled pchb2 at pci3 dev 11 function 0 pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00) gem0 at pci3 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x01) gem0: interrupting at irq 41 gem0: Ethernet address 00:30:65:c4:a1:d2, 10KB RX fifo, 4KB TX fifo brgphy0 at gem0 phy 0: BCM5400 1000BASE-T media interface, rev. 7 brgphy0: using BCM5401 DSP patch brgphy0: 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto Kernelized RAIDframe activated scsibus0: waiting 2 seconds for devices to settle... fw at fwohci0 not configured atapibus0 at atabus1: 2 targets cd0 at atapibus0 drive 0: cdrom removable cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA) uhidev0 at uhub1 port 1 configuration 1 interface 0 uhidev0: Dcom Corp. Dcom PS/2 Keyboard - PS/2 Mouse, rev 1.01/0.01, addr 2, iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0 mux 1 wskbd0: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 uhidev1: Dcom Corp. Dcom PS/2 Keyboard - PS/2 Mouse, rev 1.01/0.01, addr 2, iclass 3/1 ums0 at uhidev1: 3 buttons and Z dir. wsmouse0 at ums0 mux 0 sd0 at scsibus0 target 3 lun 0: disk fixed sd0: 34732 MB, 13816 cyl, 16 head, 321 sec, 512 bytes/sect x 71132998 sectors sd0: sync (12.50ns offset 31), 16-bit (160.000MB/s) transfers, tagged queueing sd1 at scsibus0 target 5 lun 0: disk fixed sd1: 34732 MB, 13816 cyl, 16 head, 321 sec, 512 bytes/sect x 71132998 sectors sd1: sync (12.50ns offset 31), 16-bit (160.000MB/s) transfers, tagged queueing boot device: sd0 root on sd0a dumps on sd0b cpu1: started